Sinopec 7016 High-Low Temperature Grease 250 g
Packaging specifications：250 g
Order Hotline：+86 18624936708
Applicable temperature range: -60°C to 200°C, with short-term operation up to 250°C.
Sinopec 7016 High-Low Temperature Grease
Overview:
Sinopec 7016 High-Low Temperature Grease is made from synthetic oil thickened with an organic thickener and refined with antioxidant and other additives.
Performance Characteristics:
◎Excellent high- and low-temperature performance, ensuring proper lubrication of bearings over a wide temperature range.
◎Excellent mechanical and colloidal stability, ensuring adequate lubrication of bearings.
◎Excellent water resistance, allowing bearings to operate in humid environments.
Technical Specifications:
This product conforms to the following specifications:
◎ Q/SH303 119-2004.
Applications:
◎ Suitable for lubricating bearings in aircraft motors (such as generators, motors, and converters), as well as various rolling bearings in other industrial equipment operating under high-temperature conditions.
◎ Applicable temperature range: -60°C to 200°C, with short-term operation up to 250°C.
Parameters:
| Item | Sinopec 7016 High-Low Temperature Grease |
| Appearance | Light yellow uniform ointment |
| 1/4 working taper, 0.1mm | 62 |
| Drop point, °C | 315 |
| Pressure separation oil, % (m/m) | 10.35 |
| Evaporation degree (200℃, 1 hour), % (m/m) | 1.07 |
| Corrosion (T3 copper sheet, 100℃, 3 hours) | Pass |
| Similar viscosity (-50℃, 10s⁻¹), Pa.s | 383 |
| Chemical stability (under 0.78 MPa oxygen pressure ,100℃ ,500 h), pressure drop, MPa | 0 |
Equivalent International Products:
◎ Performance comparable to German Klüber TK44N3, Japanese TORAG SILICONE SH44 silicone grease, and American DOW MOLYKOTE 44.
Precautions:
◎ Store in a clean, dry, and dark place.
◎ Avoid dust and impurities during storage, transportation, and use.
◎ Clean the lubricated area thoroughly and allow it to air dry before refilling.
◎ Do not mix with other oils.
Packaging:
◎ 250g plastic box or packaging as required.
