Sinopec 7017-1 High-Low Temperature Grease

Overview:

Sinopec 7017-1 High-Low Temperature Grease is made from synthetic oil thickened with a special organic thickener and refined with a variety of high-efficiency additives.

Performance Features:

◎ Excellent high- and low-temperature performance, especially excellent high-temperature performance, resulting in long bearing life at high temperatures.

◎ Excellent water washout resistance, suitable for lubricating bearings in humid environments.

◎ Excellent oxidation resistance, ensuring long-term performance at high temperatures.

◎ Excellent rust resistance, ensuring corrosion-free bearing components.

Technical Specifications:

This product conforms to the following specifications:

◎ SH 0431-92 (1998)

Applications:

◎ Suitable for lubricating rolling bearings operating at high temperatures, high speeds, or in the field in extremely cold regions, and operating over a wide temperature range exceeding 200°C. Examples include thrust bearings in aircraft motors, electrical appliances, clutches, high-temperature fans, and racing wheel bearings. Lubricates bearings operating at high temperatures, such as those in plastic stretching tentering machines, polyester heat-setting machines, resin finishing machines, molten salt pump motors, long-ring steamers, high-temperature dyeing vats, decatizers, and shrink-proofing machines.

◎ Applicable temperature range: -60°C to 250°C, temporarily up to 280°C.

Comparable foreign products:

High-temperature performance is comparable to the following foreign brands:

Parameters:

Application Examples:

◎ A printing and dyeing company and a dyeing and finishing company have used this product for many years on fan bearings and speed control screws with excellent results.

◎ A Shanghai printing and dyeing factory uses this product to ensure normal operation and excellent lubrication of bearings in equipment such as fabric heat-setting machines, ring dryers, decatizers, leak-proofing machines, and high-temperature, high-pressure dyeing vats, where temperatures reach 200°C to 250°C. The factory uses this product to replace German Klüber Barritrta L55/2 high-temperature grease on polyester heat-setting machines, achieving a greasing cycle of 3 to 6 months, meeting the equipment's lubrication requirements.

◎ An insulation material manufacturer successfully replaced expensive imported fluoroether grease with this product on its plastic stretching tenter frame.

◎A Nantong printing and dyeing factory used this product on the high-temperature fan bearings of a Japanese SST resin finishing machine, achieving excellent lubrication with no loss or coking.

◎A dyeing and chemical plant used this product on the bearings of an axial flow pump pumping 400°C molten salt in an anthraquinone fixed-bed reactor. The product has been in continuous operation for two and a half years with only one grease change.

Precautions:

◎Store in a clean, dry, and dark place.

◎Before use, clean the lubricated area and allow it to air dry or air-dry before refilling with this product.

◎Do not mix with other greases.

◎After use, seal the cap tightly to prevent contaminants.

Packaging:

◎1kg plastic box or customized packaging.